JO302-SE-12 All-Purpose Sealer 8oz (237ml) Value Pack of 12 (Pack) 0

JO302-SE-12 All-Purpose Sealer 8oz (237ml) Value Pack of 12 (Pack) 1

JO302-SE-12 All-Purpose Sealer 8oz (237ml) Value Pack of 12 (Pack)

卸価格

Product

This is a primer that seals the surfaces of various materials and makes them easier to paint on.
To improve adhesion of the sealer, sand the surface of the material before use.

■How to use
Apply as is or dilute 1:1 with Clear Glaze Medium or Flow Medium.
If you use the sealer without diluting it, the seal may become too hard depending on the material.
Once dry, lightly sand before painting.

▶One-Step Base Coat
Mix paint and sealer in a 1:1 ratio and apply to seal and prime in one go.
Once dry, sand and repaint.

▶Sealers do not prevent rust. For metal objects, remove any rust from the surface, clean it, then sand it,
and apply two coats of undiluted sealer. Once dry, apply a primer coat with the capacity of One-Step Base Coat.
▶The adhesion of the sealer progresses slowly over time.
This may vary slightly depending on the climate and humidity, but when using on metal, it will take at least two weeks for the paint to fully set.
▶You can use a hair dryer to dry the surface faster.
▶After use, wash the brush thoroughly with soap and water.