This is a convenient silicone mold that can be used with resin clay, oven clay, and UV-LED resin, including resin clay. You can make 5 sizes of realistic basic donut-shaped three-dimensional motifs.
【Notes on this design mold】
■ UV resin → It will be cloudy when removed after hardening because it is not mirror finished. You can make it look beautiful by coating the surface with UV resin or gloss varnish twice. Whether you can use polishing agent depends on the UV resin you are using.
Bubbles can be crushed with a carving tool. If bubbles enter, it will be less likely to enter if you apply resin to the groove of the mold and then flow the resin. Also, by warming the mold with a dryer, embossing heater, etc. before hardening, wrinkles and bubbles can be prevented.
※ Not available for silicone-based materials and two-liquid mixed resin.
※ There is a durability limit due to chemical change for materials other than natural drying clay.
※ The cut sample (parts) in the image is a work example. It is not included in the product.
■ Finished size (approx.): Φ22×H9/Φ16×H7/Φ12×H5/Φ11×H4/Φ9×H3.5mm
■ Approximately required amount of clay for one motif (approx.): 3.3g/1.5g/0.7g/0.4g/0.2g
■ Material: Silicone rubber
■ Manufactured by: Art Gallery Floree
■ Distributor: Kamejima Shouten Co., Ltd.
■ Made in Japan
- Product name
-
KAM-REJ-702 モールド ドーナツリング J シリコン製 (個)
- Product code
-
KAM-REJ-702
- Original price
-
1,330
JPY
- Wholesale Price
-
Our Prices are Only Visible to Members