This is a convenient silicone mold that can be used for natural air-dried clay, oven clay, and UV-LED resin, starting with resin clay. You can make 5 sizes of realistic donut three-dimensional motifs (old-fashioned).
【Notes on this design mold】
■ UV resin → It is not a mirror finish, so it will be cloudy when removed after curing. You can make the surface look beautiful by coating it twice with UV resin or gloss varnish. Whether or not to use polishing agent depends on the UV resin you are using.
Bubbles can be crushed with a fine work stick. If bubbles enter, it is less likely to enter if you paint the resin into the groove of the mold and then flow the resin. Also, by heating the mold with a dryer or embossing heater before curing, wrinkles and bubbles can be made less likely to occur.
※ Silicone-based materials and two-liquid mixed resins cannot be used.
※ There is a limit to durability due to chemical changes for materials other than natural air-dried clay.
※ The extracted sample (parts) in the image is a work example. It is not included in the product.
■ Finished size (approx.): Φ21 × H8 / Φ16 × H6 / Φ13 × H5 / Φ11 × H4 / Φ9 × H3.5mm
■ Approximately the amount of clay required for one motif (approx.): 2.5g / 1.2g / 0.6g / 0.3g / 0.1g
■ Material: Silicone rubber
■ Manufacture: Art Gallery Floree
■ Distributor: Kamejima Shouten Co., Ltd.
■ Made in Japan
- Product name
-
KAM-REJ-701 モールド オールドファッション I シリコン製 (個)
- Product code
-
KAM-REJ-701
- Original price
-
1,290
JPY
- Wholesale Price
-
Our Prices are Only Visible to Members