This is a convenient silicone mold that can be used for natural air-drying clay, oven clay, and UV resin. You can make a three-dimensional motif of five sizes of realistic corona.
【Notes on this design mold】
■ UV resin → It will be cloudy when removed after curing because it is not finished with a mirror finish. You can make it look beautiful by coating the surface with two coats of UV resin or clear varnish. Whether or not you can use a polishing agent depends on the UV resin you are using.
If bubbles enter, please puncture them with a carving tool. If bubbles enter, it will be less likely to enter if you first apply resin to the groove of the mold and then flow the resin. Also, by heating the mold with a dryer or embossing heater before curing, wrinkles and bubbles can be made less likely to occur.
* Cannot be used for silicone-based materials or two-liquid mixed resins.
* There is a durability limit due to chemical changes for materials other than natural air-drying clay.
* The extracted sample (parts) in the image is a work example and is not included in the product.
■ Finished size (vertical x horizontal x thickness): about 16 x 12 x 8/13 x 9 x 6/ 11 x 8 x 5.5/10 x 7 x 4.5/ 8 x 5 x 4mm
■ Approximately required clay amount for one motif (about): (large) 1g / other small sizes each less than 1g
■ Material: Silicone rubber
■ Manufactured by: Art Gallery Floree
■ Distributor: Kamejima Shouten Co., Ltd.
■ Made in Japan
- Product name
-
KAM-REJ-696 モールド コロネ 立体型 (個)
- Product code
-
KAM-REJ-696
- Original price
-
1,130
JPY
- Wholesale Price
-
Our Prices are Only Visible to Members