This is a convenient silicone mold that can be used for natural air-dried clay, oven clay, and UV resin. You can make a miniaturized three-dimensional motif of a real mountain-shaped bread with 5 sizes.
(Note regarding this design mold)
■UV resin→It will become cloudy when removed after curing due to the lack of mirror finish. You can make it look beautiful by coating the surface with two layers of UV resin or clear varnish. Whether or not you can use polishing agent depends on the UV resin you are using.
Bubbles can be crushed with a craft stick. If bubbles enter, it is less likely to enter if you apply resin to the groove of the mold and then flow the resin while it is warm with a dryer or embossing heater.
※Silicone-based materials and two-liquid mixed resin cannot be used.
※There is a limit to durability due to chemical changes in materials other than natural air-dried clay.
※The extracted sample (parts) in the image is a work example. It is not included in the product.
■Finished size (vertical × horizontal × thickness): 20 × 16 × 4 / 14 × 11 × 3 / 9 × 8 × 2 / 7 × 6 × 2 / 5 × 4 × 1.5mm
■Approximate amount required for one motif (about): (large) 1.2g / 1g or less for other small sizes
■Material: Silicone rubber
■Manufacture: Art Gallery Floree
■Distributor: Kamejima Shouten Co., Ltd.
■Made in Japan
- Product name
-
KAM-REJ-687 モールド イギリスパン 立体型 (個)
- Product code
-
KAM-REJ-687
- Original price
-
1,060
JPY
- Wholesale Price
-
Our Prices are Only Visible to Members